S-Type™ Heater & Blower

ST-HB-MVP

Versatile Heating & Cooling Enclosure
  • Heated Fan for Defogging Lens
  • Supports Internal Storage to Protect Peripherals
  • Made of Heavy Duty Polycarbonate
  • IP68-Rated Weatherproof Housing
  • IK10 Level Impact Protection
  • Stainless steel arm mount inc
  • Stainless Steel Hardware
  • USA Made and supported

Dotworkz S-Type™ Heater & Blower – All-Weather Heated Camera Enclosure for Fixed Surveillance

 

Built for Contractors. Ready for the Real World.

If you’re installing fixed cameras in cold, wet, or unpredictable conditions, the Dotworkz S-Type™ Heater & Blower is the rugged, field-proven solution you can count on.

This isn’t just a weatherproof box—it’s a fully-sealed, climate-controlled housing built to keep your surveillance gear clear, dry, and always online. With an integrated internal heater and active blower system, the S-Type keeps lens fog, condensation, and internal moisture from taking down your camera during mild to cold swings in temperature.

Whether you’re securing a school, monitoring traffic, or outfitting a municipal or industrial project, this housing makes sure your fixed IP camera works through rain, snow, and everything in between.

Why Security Pros Choose the S-Type Heater & Blower

  • Integrated Heating System – Maintains ideal internal temps and prevents fogging or cold-related shutdowns

  •  Built-In Blower Fan – Circulates air to eliminate hot spots and reduce internal humidity buildup

  •  IP66-Rated, Impact-Resistant Shell – Withstands dust, rain, snow, and vandalism

  • Fast to Install, Easy to Maintain – Designed with contractors and kit-builders in mind

  • Compatible with Most Fixed Cameras – Supports Axis, Hanwha, Sony, Hikvision, and more

Perfect for These Security Deployments:

  • Traffic and transportation monitoring

  • School and campus security

  • Utility, energy, and remote sites

  • Border, perimeter, and infrastructure protection

  • Citywide surveillance systems

  • Budget-sensitive commercial installs that still demand long-term reliability

Tech-Smart Protection in a Tough Housing

  • Material: Marine-grade polycarbonate

  • Sealing: IP66 waterproof and dustproof

  • Heating System: Thermostat-controlled internal heater

  • Blower System: Low-noise, high-efficiency fan

  • Operating Range: -40°F to 167°F

  • Compatible Power: 12V / 24V / PoE options

  • Mounting Options: Wall, pole, corner, parapet, or custom bracket

Made in the USA. Trusted by Installers Everywhere.

Dotworkz S-Type Heater & Blower is the camera housing that saves time, reduces service calls, and keeps fixed cameras performing when conditions change. No fog. No downtime. No surprises.

Accessories

Z-Bracket - PTZ / Static / Fixed Security Camera Housing Mount Bracket

NEW Z-Bracket Rooftop Mount

Parapet Clamp System
  • No Drilling Required: Avoid costly roof penetrations.
  • Supports wall and Corner thicknesses from 2” to 34”.
  • Supports all major camera types and weights including Axis, Hanwha, Bosch, Panasonic and more, including axis cabinets, NEMA boxes, Starlink etc.
  • Simplifies installs and lowers project expenses. No need for exterior access, lifts, or scaffolding.
  • 100% Adjustable and can be field configured
  • Can be secured to top of parapet for added security
  • Replaces corner mounts and J mounts without wobble or unslightly dated aesthetics
  • Long Lasting High Quality Lightweight Powder Coated Aluminum
Angle Correctionn Plate - PTZ / Static / Fixed Security Camera Housing Mount Plate

Angle Correction Plate Bracket

BR-MPM1-AC
  • Works with all Dotworkz Camera Housings.
  • Secures to poles with a minimum of ¾” diameter.
  • Angle Correction Plate can be added to correct the angle of the enclosure up to 10 degrees for non plum poles.
  • Includes antenna mounts for adding additional Omni or yogi antennas.
EZ Lock Pole - PTZ / Static / Fixed Security Camera Housing Mount Bracket

EZ Lock Pole Camera Mount Bracket

BR-MPM1
  • Works with Dotworkz Camera Housings.D2/D3/STYPE/STXL/ BASH/ Other Brands ie PELCO
  • Secures to poles with a minimum of 2” diameter.
  • Angle Correction Plate can be added to correct the angle of the enclosure up to 10 degrees for non plum poles
  • Includes antenna mounts for adding additional Omni or yogi antennas
  • USA Made and Supported
  • Includes Friction Wraps for long term safety and ease of install
  • High Quality Pem Nuts backed
Can't believe the temperature difference!
This cooldome as you call it is truly incredible. We installed this housing in a spot that hit 120 degrees F. We checked the temp inside the camera housing and it was only 80 degrees F. This PTZ camera housing is so freaking cool. I couldn't believe the temperature difference until I saw it. Simply amazing.


- F. Lionel
01/01/2023
Works great!
It does a fantastic job cleaning the lenses. Super easy to use and surprisingly very lightweight. I use this on several jobs inside and out and it's so nice not to have bring a ladder, bucket, and what not. The cleaning kit and cleaning solution is all I need now. So nice.



- R. Livingston
02/09/2023
Best and Easiest Dome Cleaning Tool Ever!!
I was a little skeptical at first but this kit is so easy to setup and use that I bought 3 more. I've saved my staff so much time using these DomeWizard kits. My staff especially loves that they don't have to use the cherry picker anymore. I highly recommend this kit.



- B. Evans
02/23/2024
Technical help on purchase
The pinout for the power cable I ordered seemed confusing. When I called technical support, I was put in touch with the engineer who designed the cable, and he was quickly able to give me the proper information.

- M. Brown
02/23/2024
Best Outdoor Camera Enclosure
The design is sturdy and has the room to mount any additional required equipment.




- J. Hindemith
02/23/2023
5 Star customer service!
Best customer service I've encountered in a long time.




- D. Massie
02/23/2023