D2 CoolDome™ Heat Protected

Camera Housing

Active Cooling Camera Solution
  • Solid State Active Temperature Regulation 12/ 24 VDC
  • Non Heat Conductive Polycarbonate Shell 3 stage insulation, radiant barrier, Non Metallic
  • Internal Storage Space Also Protects Peripherals
  • Reflective Thermally Protective Polycarbonate Reflective Shell
  • Protective Lens Bubble options: tinted high Impact standard, Oversized, blank out plate,
  • IP66 100% Water Tight
  • IK10 Level Impact Protection
  • Perfect for sensitive high performance cameras

Dotworkz D2 CoolDome™ – Actively Cooled Outdoor Camera Enclosure for Extreme Heat Protection

Extreme Heat-Ready. Keeps Always ON.

The Dotworkz D2 CoolDome™ is the go-to solution for protecting sensitive PTZ, A.I., multi-sensor, and broadcast cameras in high-temperature, sun-exposed environments. Where standard “-E” outdoor housings fail, the D2 CoolDome™ performs—keeping your video systems safe, online, and crystal clear in extreme heat.

Cools up to 25°F below ambient or more

 Stops shutdowns, blurry images, and thermal lag

Solid-state sealed cooling—no filters, or cooler maintenance 

 100% made in the USA, supported by Dotworkz

Proven Advanced Solid-State Cooling

Equipped with Dotworkz CoolDome™ active thermal management, this system uses a solid-state thermoelectric cooler to pull heat out—no moving parts, no fans to fail. The cooling module is 100% sealed, protecting internal components from dust, moisture, and corrosion while keeping your camera cool and clear.

Built Tough for Harsh Outdoor Installs

  • Non-conductive thermal polycarbonate shell

  • IP66 weatherproof + IK10 impact-rated

  • Stainless steel hardware resists salt, rust, and impact

  • Promotes Camera Survival in heatwaves, sun exposure, wind, rain, and vandalism

Bigger Interior = Smarter Cameras

The D2 CoolDome™ gives you extra space to install:

  • Cellular radios & routers (Starlink, Peplink, Gateways, GPUs )

  • Micro NVRs or edge processors

  • PoE+ injectors, antennas, or audio/strobe kits

 

Save on extra mounts or junction boxes. The D2 is your camera housing and gear cabinet in one.

Ideal For:

  • Rooftop PTZ & broadcast systems

  • Border & airport surveillance

  • Outdoor traffic monitoring

  • Stadiums & live events

  • Smart city A.I. camera networks

  • Solar farms and remote infrastructure

The Dotworkz D2 CoolDome™ is economical for several reasons — especially when compared to typical “outdoor-rated” camera setups. Here’s why it’s a cost-saving, high-value solution for camera installers, project managers, and integrators:

Why the D2 CoolDome™ is Economical:

Prevents Expensive Equipment Failure

  • The CoolDome™ actively cools your camera and internal gear, avoiding shutdowns, blurry images, and heat damage.

  • Avoids the cost of camera replacements, service calls, or losing footage due to high-temperature failures.

Combines Multiple Components Into One

  • Replaces the need for a separate IP camera enclosure, weatherproof NEMA box, and external cooling system.

    • Routers

    • PoE injectors

    • Starlink power bricks

    • NVRs

    • Audio and antenna systems

      Built-in interior space lets you house:

  • Reduces installation time and accessory purchases.

Reduces Labor & Install Complexity

  • One mount. One housing. One weather-sealed system.

  • Installs faster and safer—especially in rooftop, utility pole, or remote desert locations.

  • No drilling or custom cooling retrofits needed.

Zero Maintenance Cooling

  • The solid-state CoolDome™ has no moving parts or filters to replace, saving on long-term service costs.

  • Fully sealed, 100% dustproof—ideal for remote installs where service trucks are expensive.

Outlasts Cheap Metal Housings

  • Non-conductive thermoplastic shell won’t rust or corrode like cheap powder-coated aluminum.

  • IK10 and IP66-rated, meaning it won’t crack, dent, or leak after impact or weather abuse.

  • Built to last 5–10+ years in the field without fail.

One-Time Investment, Long-Term ROI

  • Especially valuable in broadcast, law enforcement, or city surveillance where video cannot go down.

  • A small investment up front vs. massive cost of camera failure, reinstallations, or lost footage.

Compatible With:

Broadcast and Security cameras Axis Q61 PTZs, V59 Series, Sony BRC, Panasonic PTZ, BirdDog, PTZOptics, Hanwha, and more.

Proudly made and supported 100% in the USA. Built by Dotworkz—trusted by pros for 27+ years.

Don’t let heat stop your cameras workflow.

Choose the Dotworkz D2 CoolDome™—the actively cooled camera housing that stays sealed, stays cool, and stays online.

Accessories

Z-Bracket - PTZ / Static / Fixed Security Camera Housing Mount Bracket

NEW Z-Bracket Rooftop Mount

Parapet Clamp System
  • No Drilling Required: Avoid costly roof penetrations.
  • Supports wall and Corner thicknesses from 2” to 34”.
  • Supports all major camera types and weights including Axis, Hanwha, Bosch, Panasonic and more, including axis cabinets, NEMA boxes, Starlink etc.
  • Simplifies installs and lowers project expenses. No need for exterior access, lifts, or scaffolding.
  • 100% Adjustable and can be field configured
  • Can be secured to top of parapet for added security
  • Replaces corner mounts and J mounts without wobble or unslightly dated aesthetics
  • Long Lasting High Quality Lightweight Powder Coated Aluminum
Angle Correctionn Plate - PTZ / Static / Fixed Security Camera Housing Mount Plate

Angle Correction Plate Bracket

BR-MPM1-AC
  • Works with all Dotworkz Camera Housings.
  • Secures to poles with a minimum of ¾” diameter.
  • Angle Correction Plate can be added to correct the angle of the enclosure up to 10 degrees for non plum poles.
  • Includes antenna mounts for adding additional Omni or yogi antennas.
EZ Lock Pole - PTZ / Static / Fixed Security Camera Housing Mount Bracket

EZ Lock Pole Camera Mount Bracket

BR-MPM1
  • Works with Dotworkz Camera Housings.D2/D3/STYPE/STXL/ BASH/ Other Brands ie PELCO
  • Secures to poles with a minimum of 2” diameter.
  • Angle Correction Plate can be added to correct the angle of the enclosure up to 10 degrees for non plum poles
  • Includes antenna mounts for adding additional Omni or yogi antennas
  • USA Made and Supported
  • Includes Friction Wraps for long term safety and ease of install
  • High Quality Pem Nuts backed
Can't believe the temperature difference!
This cooldome as you call it is truly incredible. We installed this housing in a spot that hit 120 degrees F. We checked the temp inside the camera housing and it was only 80 degrees F. This PTZ camera housing is so freaking cool. I couldn't believe the temperature difference until I saw it. Simply amazing.


- F. Lionel
01/01/2023
Works great!
It does a fantastic job cleaning the lenses. Super easy to use and surprisingly very lightweight. I use this on several jobs inside and out and it's so nice not to have bring a ladder, bucket, and what not. The cleaning kit and cleaning solution is all I need now. So nice.



- R. Livingston
02/09/2023
Best and Easiest Dome Cleaning Tool Ever!!
I was a little skeptical at first but this kit is so easy to setup and use that I bought 3 more. I've saved my staff so much time using these DomeWizard kits. My staff especially loves that they don't have to use the cherry picker anymore. I highly recommend this kit.



- B. Evans
02/23/2024
Technical help on purchase
The pinout for the power cable I ordered seemed confusing. When I called technical support, I was put in touch with the engineer who designed the cable, and he was quickly able to give me the proper information.

- M. Brown
02/23/2024
Best Outdoor Camera Enclosure
The design is sturdy and has the room to mount any additional required equipment.




- J. Hindemith
02/23/2023
5 Star customer service!
Best customer service I've encountered in a long time.




- D. Massie
02/23/2023